Access equipment

Contract interiors

Mezzanine floors
Storage Walls
Toilet Cubicles
Aluminium Doors
Steel Partitions

Handling equipment

Storage products



Online shop

Request information

Polbeth Industrial Estate, West Calder, West Lothian. EH55 8TJ Scotland

Tel: +44 (0)1506 871757 fax +44 (0)1506 873400


Monobloc is a fully relocatable partitioning system, constructed from monobloc panels of 35/50/70mm thickness. The panels are manufactured from flaxboard or a combination of flaxboard/chipboard and are pre-finished in vinyl, melamine, laminate, wood veneer or steel. Undecorated panels are available for the client with a special requirement.

The panels are available in solid core construction, tubular core, slatted core or slatted core with mineral wool (as illustrated) for high sound areas. The slatted core panels are also recommended when incorporating wire management or services.

Monobloc schematic
The fashionable wall look given by the vetical joints in monobloc partitioning

Vertical joints have a chamfered edge and, when installed, give the fashionable wall-like look.

Standard module widths are 600mm, 900mm, 1200mm but special sizes are available for a made to measure installation.

The maximum height of a single panel is 3 metres but double and triple lift installations made possible with transom aluminium joint sections.

Clips Monobloc has a "in vogue" wall-like look, using the minimum of components, combined with remarkable simplicity.

Pre-finished panels in a massive range of finishes are available to suit the modern working environment and are ideally suited to executive areas, commercial offices, production environments, clean assembly areas and laboratories.

Due to the unique construction of the system, on-site installation time is greatly reduced, a consistent high standard of installation is ensured.

The system is ideal for the client who may need to alter the layout time again and combines efficiency with economy as all components are re-usable.

Clips Monobloc is available made to measure or ex-stock for the client with an immediate requirement.

Monobloc partitioning
Ideal for re-use time and time again
Pre-finished in a wide selection of vinyl, real veneers, melamine or steel
pre-glazed single and double, incorporating louvre blinds
Monobloc partitioning with door
Simple and easy to install
Available in different module widths and heights
Fire rated and good acoustic performance
Panels are load bearing and ideal for supporting fixtures and fittings
Wireways and services incorporated in ducted panels
Want to see more images of Monobloc?

© Copyright 2003 MGK Scotland